Well, as a Cheap Gamer, picking the paints to use can make or break the costs of a project. Are there ways of making significant savings? Of course, though you will need to look beyond the confines of a single provider!
There are three approaches we can take here. We can:
- Simply look for cheaper alternatives for every paint.
- Go for the same quality end result, but accept that some things will take longer
- Accept a reduced quality end result to save costs.
What do we mean by this? Well, as an example, lets take priming our models.
Primers and Aerosols
Lets say we’re painting ultramarines, and usually spray our models with a primer, then a blue aerosol. We could buy a 400ml can of chaos black or skull white primer for £10.40, and a 400ml macragge blue spray from a GW store at a pretty hefty cost (another £11.75) to do the job right. We could buy the same cans from an online GW seller at a discount, maybe 10% (say £9.40 and £10.60), but we’ll need to wait for the order to arrive, and might need to put in a combined order with other bits if we don’t lose the saving in shipping costs. We could look at proper all in one blue primers that aren’t from GW at all, like an Army Painter 400ml, and make a further saving, probably about another 10% on the can, and no need for a separate primer (£8.99). Or we could really go for savings, and go with a top notch but cheap grey primer (500ml for £7.49) from Halfords, and accept that we’ll have to actually paint the blue onto the models ourselves, not just touch it up. I haven’t included the cost of the blue pot here, as we’d need it for touch ups any way in all the other cases too.
What option would you pick? In this case, we need to prime and base coat the model, so there isn’t really a great choice for option 3. Priming and a basic colour is always going to be necessary! We can’t easily reduce the quality of our methods (though some would argue the Army Painter primer isn’t as good a spray sometimes.)
The real choice is between option 1 – getting to the same point by looking for cheaper locations for the same paints or a different brand alternative, or option 2 – just priming the models in a standard colour like grey and accepting that we’ll spend more time and paint the base colour on ourselves. Oddly, option 2 is probably going to lead to a higher quality finished product as well!
In the extreme case of the greatest saving here, we can knock around £15 off the project cost by adding manual painting time and using halfords primer. In fairness, many people actually use the Macragge blue to prime, even though its not really a fully grippy proper primer, but even in those cases we’re saving a fair few pounds and going for a better colour base for the other colours with the grey.
We’re on our Cheap Gamer journey!
Choosing the actual pots of paint to use is a little harder, as we have a much wider range of options.
One of the hardest things here is working out which paints you actually need for the models in the first place. The best advice I can give is simple. Don’t worry about cost at this point! I know that sounds like odd advice for the Cheap Gamer! The key is making sure we make informed decisions to save money.
Find a paint scheme or recipe that you think will work really well for you. It might be from a forum, a blog, the pages of white dwarf, whatever. The exact paint range doesn’t matter at this stage. The real key is knowing what effect you want to acheive.
Once we have a list of paints we need, we can then …. go all Cheap Gamer! We can look for cheaper alternatives for each paint. We can accept some time compromises – going for standard alternative paints rather than base or foundation paints and putting on an extra thin coat or two. And we can consider either mixing some of our own highlights rather than buying all the pots (risking a little inconsistency over the army), or just skipping some of the full range of layers for a slightly lower quality finish. You can also skip some of the “technical” options if you are confident. Honestly, the GW Drybush range is a bit unnecessary! You can dry brush with just a little paint on the brush after drying it a bit on a paper towel!
In terms of savings by looking at different paint ranges, Vallejo paints, for example, tend to be around 40p cheaper a pot than the Games Workshop equivalent, and contain 17ml rather than 12ml of paint. Army Painter tends to be around 70p a pot cheaper than GW, and you get 18ml. P3 is about the same price as GW, but you get 18ml instead of 12, and they have fantastic coverage as a base coat.
The paint matching chart here is an absolutely tremendous resource. Simply match the colours you need from your chosen scheme against the other ranges!
If you choose to save money by mixing some of your own highlights by adding white or another colour, there are some really useful tricks. The first is simple! record the proportions you are using! If you don’t, you’ll find increasing amounts of variation of your army. The 2nd is to use paints like Army Painter or Vallejo that come in dropper bottles, as it is just so much easier to remix the proportions again. And finally, if doing it for a full army, consider mixing up a full pots worth and labelling it. That’ll guarantee you consistency without remixing.
Once you have your full list of needed paints, I thoroughly recommend checking the available prepackaged paint sets from the various manufacturers. They can offer major savings, and if your needed range matches quite closely, you can find targeting a particular set works quite well! Don’t fall into the trap of thinking “ooooh, that’s great value, look at all these paints” though. Unless you are saving money on the actual paints you need, its a waste for now.
And don’t forget to take your existing paints into account. Check what you have before you start buying! Its very easy to forget you have paint X if you haven’t used it for a while, or its in an older box of paints. Make sure you only actually buy what you need.
There are times you may want to choose a dearer option. Some paints are difficult ones to work with, like yellows and metals. That’s down to you. The trick really is to plan exactly what you want to work with, and think about how you can minimise the costs. Honestly, just avoiding a situation where you need a paint that afternoon or waste hobby time, so you run out and pay the top whack, will make a big, big difference.
Do remember that even if a paint isn’t quite as good, or doesn’t have as good coverage, applying multiple thin coats will get you to a great result over time. It might take a little longer, but generally you can achieve great results with pretty much any paint range. And we’re aiming for good results at minimum costs!
Imagine if you need 10 pots of paint. Just switching to Vallejo directly could save you £4 on the project over GW. Army Painter might save you £7 if you can find all the right colours. Mixing your own highlights and removing the need for just 2 pots could save you another £3.50 to £4.50. And if we can find a close paint set rather than buying them all individually we might save another £2 or so. Its not insignificant amounts, and this is just the paints! We’re starting to see our Cheap Gamer approach pay off!
Again, this isn’t a criticism of GW paints. They have a fantastic range of colours, excellent coverage and a tremendous range of technical options too. They just aren’t the cheapest way to paint.